How Much Does Managed IT Cost for a 50-Person Company?
What does managed IT cost per user for a 50-person company? Typical price ranges, what's included, what's extra, and how to compare MSP quotes.
Picture a Monday morning at a 50-person company. The owner gets two managed IT quotes back. One says $4,500 a month. The other says $9,000. Both promise "fully managed IT," both have nice logos, and nobody in the room can explain why one costs twice as much. If you've been searching for managed IT cost per user numbers, you've probably hit this exact wall.
I'm Harsha, and I've spent 15 years on the network side of IT before my partner Mukesh and I started SoftwarePac in Roanoke. I've written proposals, read competitors' proposals, and cleaned up after cheap ones. So I'll be upfront: I run an MSP, and I still want you to walk away able to judge any quote, including ours.
This post walks through what a 50-person company usually pays, what drives the price up or down, and how to compare quotes that don't look anything alike.
In this guide
- How MSPs price managed IT
- What managed IT costs per user for a 50-person company
- What's usually included, and what usually isn't
- What pushes your price up or down
- How to compare two quotes that look nothing alike
- Red flags in a managed IT proposal
- Frequently asked questions
How MSPs price managed IT
Before you compare numbers, you need to know which pricing model each quote uses. Most MSPs use one of three, and some mix them.
Per user, per month
This is the most common model for fully managed IT. You pay a flat monthly rate for each employee who uses technology. It covers that person's laptop, phone, email account and help desk calls, no matter how many devices they have.
Per-user pricing is easy to budget. When you hire five people, you know exactly what your bill goes up by.
Per device, per month
Some providers charge for each workstation, server, firewall and switch instead. This can make sense when you have lots of shared devices, like shop-floor PCs that several shifts use.
The catch is that every new device adds cost, and the line items can get long. Ask whether servers and network gear are priced differently from workstations, because they usually are.
Tiered or "all-you-can-eat" bundles
Many MSPs package services into tiers, such as basic, standard and premium. The lower tiers often cover monitoring and patching only, with help desk billed hourly. The top tier usually covers almost everything with unlimited support.
There's nothing wrong with tiers. Just make sure you're comparing the same tier across vendors, not a bargain tier against someone's full-service plan.
What managed IT costs per user for a 50-person company
For fully managed IT, a common range is somewhere around $100 to $200 or more per user per month. That's consistent with what I see in proposals and what industry pricing guides commonly report. Your number depends heavily on what's bundled in, especially security.
Here's what that looks like at 50 users. These are illustrative ranges, not quotes:
- At $100 per user: about $5,000 a month, or $60,000 a year
- At $150 per user: about $7,500 a month, or $90,000 a year
- At $200 per user: about $10,000 a month, or $120,000 a year
That's a wide spread, and it explains the Monday-morning confusion above. Two honest quotes can land at opposite ends of this range because they cover very different things.
What about co-managed IT?
If you already have an in-house IT person, you may not need full management. Co-managed plans, where the MSP provides tools, monitoring and backup for your staff, are often priced lower than fully managed plans. I covered how that setup works in our post on MSP vs. hiring a full-time IT person.
One-time costs to expect
Monthly fees aren't the whole story. Many MSPs charge a one-time onboarding fee to document your environment, install their tools and fix urgent problems. Some fold it into the first few months instead.
Ask about this up front. A low monthly rate with a large onboarding bill can cost more in year one than a higher rate with no setup fee.
What's usually included, and what usually isn't
This is where most quote comparisons fall apart. Every MSP builds its packages differently, so always read the service agreement itself, not just the proposal summary.
Commonly included in a fully managed plan
- Help desk support for your staff by phone, email or remote session
- Patching and monitoring for workstations and servers
- Management of your firewall, switches and Wi-Fi
- Backup monitoring and periodic restore testing
- Onboarding and offboarding of employees
- Vendor management, like calling your internet provider when the line drops
- Endpoint security, such as antivirus or EDR, often with some limits
- Regular planning meetings and documentation of your environment
Commonly billed separately
- Software licenses, such as Microsoft 365, which you usually pay per user on top of the IT fee
- Hardware, like new laptops, servers or firewalls
- Project work, such as an office move, a server migration or a firewall replacement
- Advanced security, such as 24/7 monitoring by a security operations center (SOC)
- Compliance work, like CMMC, NIST 800-171 or HIPAA readiness
- On-site visits, especially if the provider is mostly remote
- After-hours support, if the plan only covers business hours
If you're a defense supplier, compliance work deserves its own line in your budget. Our post on CMMC Level 1 vs. Level 2 explains why the level you need changes the scope so much.
What pushes your price up or down
Two 50-person companies can get very different quotes from the same MSP. Here are the factors that usually make the difference.
Your security requirements
Security is the biggest swing factor I see. A basic plan might include standard antivirus and email filtering. A stronger plan might add EDR, a 24/7 SOC, security awareness training and multi-factor authentication management.
Those tools cost the MSP real money every month, and that cost shows up in your price. If your cyber insurance carrier asks about EDR and 24/7 monitoring on its application, a cheap plan that leaves them out may not be cheap for long.
How many locations and how much on-site work
A single office is simpler than a plant, a warehouse and a sales office in three towns. Every site has its own internet circuit, firewall and network gear to manage. If you need a technician on site every week, expect that to be priced in.
Servers, shop-floor systems and line-of-business software
A company that runs everything in Microsoft 365 is simpler to support than one with on-premises servers, an ERP system and machines on the plant floor. Manufacturers often have older PCs tied to production equipment that can't be easily upgraded. Those take more care, and our post on securing shop-floor networks explains why.
Support hours and response times
Business-hours support costs less than 24/7 coverage. If you run second or third shifts, you'll want after-hours support written into the agreement, with clear response times.
The state of your environment today
If your network is undocumented, your backups haven't been tested and half your laptops are past end of life, the first few months will take more work. Some MSPs price that into onboarding. Others raise the monthly rate. Either way, you pay for the cleanup somewhere.
How to compare two quotes that look nothing alike
Here's a process you can run in an afternoon. It turns two very different proposals into something you can actually compare.
- Normalize the pricing. Convert every quote to a total monthly cost for your real user and device count, including any per-device or per-server fees.
- Add the one-time costs. Put onboarding fees and required hardware into a first-year total, not just a monthly number.
- Build a coverage checklist. List the services above and mark each quote as included, extra, or not offered.
- Price the extras. For anything billed separately that you know you'll need, ask for the rate and add it in.
- Compare security side by side. Write down exactly which endpoint, email and monitoring tools each plan includes.
- Check the response times. Look for written service levels, not "we're very responsive."
- Ask about an incident. Who responds if you get hit with ransomware on a Saturday, and is that covered or billed hourly?
- Read the contract terms. Note the length, the cancellation terms, and how you get your passwords and documentation back if you leave.
Once you've done this, the $4,500 quote and the $9,000 quote often end up much closer than they first looked. Or you'll find the cheap one is missing something you can't live without.
If you're also deciding what local support should look like, our post on what Roanoke businesses should expect from managed IT covers service levels in more detail.
Red flags in a managed IT proposal
Most MSPs are honest, but some proposals are built to look cheap rather than be clear. Watch for these:
- No written list of what's excluded. If the proposal only lists what's included, you'll find the exclusions on your first invoice.
- "Unlimited support" with no definition. Ask what counts as support and what counts as a project.
- No backup testing. Monitoring backups is not the same as proving you can restore them.
- Security as a vague promise. "Enterprise-grade security" should come with the names of the actual tools.
- Long contracts with no exit path. Multi-year terms aren't unusual, but you should know how to leave and what you get back.
- No discovery before the quote. A provider that quotes a 50-person company without looking at the environment is guessing.
Frequently asked questions
How much should a 50-person company pay for managed IT?
For fully managed IT, a common range is around $100 to $200 or more per user per month, so roughly $5,000 to $10,000 a month for 50 users. Where you land depends on what's included, especially security services, on-site work and after-hours coverage. Always compare quotes on the same scope.
Is per-user or per-device pricing better?
Per-user pricing is usually simpler to budget and works well when most people have their own laptop and phone. Per-device pricing can be fairer when you have lots of shared machines, like shop-floor PCs used by several shifts. Ask each MSP to price your real setup so you can see the total either way.
Does managed IT pricing include Microsoft 365?
Usually not. Most MSPs charge for Microsoft 365 licenses separately, on top of the managed IT fee, though some resell and bill them on the same invoice. Check the proposal so you don't count the cost twice or miss it entirely.
Why are some managed IT quotes so much cheaper?
The cheaper quote often includes fewer services, such as business-hours support only, basic antivirus instead of EDR, or hourly billing for anything beyond monitoring. Sometimes it's simply a lower-cost provider. Line the quotes up against the same checklist before deciding.
Are there one-time fees with managed IT?
Often, yes. Many MSPs charge an onboarding fee to document your environment, install their tools and fix urgent issues. Hardware upgrades and project work are also usually billed separately from the monthly fee.
Know what you're buying before you sign
The right managed IT price for your company depends on what you have today and what you actually need protected. That's hard to judge from a proposal alone.
Our free cybersecurity assessment looks at your network, endpoints, backups and security controls, and you get a plain-English summary of what we found. Use it to compare any MSP quote, including ours. Request your free cybersecurity assessment and we'll take it from there.
Related reading
- MSP vs. Hiring a Full-Time IT Person: A Real Cost Breakdown
- Managed IT Services in Roanoke, VA: What Local Businesses Should Expect
- IT Consulting: How to Choose the Right Technology for Your Business
Harsha is a co-founder of SoftwarePac Technologies in Roanoke, VA, and a network engineer with 15 years of experience.




