Signs Your Firewall Is Outdated (and What to Replace It With)
8 signs your firewall is outdated, how to check its support status in 15 minutes, and what to replace it with, from a Roanoke network engineer.
It's Monday morning and your ERP is crawling. Someone on the floor says the internet "feels slow again," and the owner wants to know why the new cloud backup keeps failing overnight. You log into the firewall to check, and the login page looks exactly like it did in 2017. That's often the moment people start searching for the signs your firewall is outdated.
I'm a network engineer, and I've spent about 15 years in server rooms and network closets. The firewall is the box everyone forgets about until something goes wrong. It sits in the rack, blinks, and quietly ages while the business around it changes.
This guide walks through the warning signs I look for, how to check your firewall's support status in about 15 minutes, and what to replace it with if it's time. It's written for IT managers and owners at small manufacturers and businesses who don't have time to read vendor datasheets all afternoon.
In this guide
- Why an old firewall is riskier than it used to be
- 8 signs your firewall is outdated
- How to check your firewall's support status in 15 minutes
- What to replace it with
- How to swap firewalls without a weekend of downtime
- Frequently asked questions
- Not sure where your firewall stands?
Why an old firewall is riskier than it used to be
Ten years ago, a firewall mostly needed to block unwanted inbound traffic and pass the rest. Today it's also your VPN gateway, your web filter, often your intrusion prevention system, and the front door attackers test first. That makes it one of the most targeted devices on your network.
Firewalls and VPN appliances from nearly every major vendor have shown up on CISA's Known Exploited Vulnerabilities list in recent years. Attackers like these devices because they face the internet and usually aren't watched by endpoint security tools. If one is compromised, the attacker is already past your perimeter.
The risk gets much worse once a device reaches end of support. In February 2026, CISA issued Binding Operational Directive 26-02, which orders federal civilian agencies to inventory their edge devices and remove ones that are past end of support. The directive explicitly covers firewalls, routers, switches and wireless access points, and CISA said it was aware of widespread exploitation campaigns targeting these unsupported devices. It doesn't apply to private businesses, but it's a clear signal of how seriously the government takes this problem.
8 signs your firewall is outdated
Here's what I check when I walk into a new customer site. One of these on its own might be fine. Two or three together usually means it's time to plan a replacement.
1. It's past (or close to) end of support
This is the big one. Every vendor publishes end-of-sale and end-of-support dates. After the last date of support, you stop getting firmware updates, security patches and help from the vendor's support team.
For example, Cisco's notice for the ASA 5508-X and 5516-X lists a last date of support of August 31, 2026. Plenty of small businesses still have those units in their racks. If yours is one of them, it's no longer getting fixes for new vulnerabilities.
2. The firmware hasn't been updated in a year or more
Even supported firewalls are only as safe as the firmware running on them. If nobody has updated it since it was installed, it's likely missing fixes for known and actively exploited flaws. A firewall that's "supported" but never patched isn't much better than one that isn't.
3. Security subscriptions have lapsed
Many next-generation firewalls depend on paid subscriptions for intrusion prevention, malware filtering, web filtering and threat intelligence updates. When those lapse, the box keeps passing traffic, so nobody notices. But the features you bought it for quietly stop working. Log in and check the license page. You might be surprised.
4. It slows down when you turn on security features
Older firewalls were sized for a world with less traffic and less encryption. Turn on intrusion prevention or SSL/TLS inspection and throughput can drop sharply. If your team has disabled security features to "fix" slow internet, the firewall is undersized for how you use it today.
5. It can't keep up with your internet connection
A lot of businesses upgraded from a 100 Mbps line to gigabit fiber over the last few years. The firewall didn't get the memo. If your speed tests look fine plugged straight into the modem but slow behind the firewall, the firewall is your bottleneck.
6. Your remote access still relies on old VPN tech or open ports
If people connect from home through an old VPN client that keeps breaking, or worse, through Remote Desktop exposed directly to the internet, that's a red flag. Modern firewalls support current VPN options with multi-factor authentication. Exposed RDP ports are one of the most common ways ransomware crews get in.
7. You can't see what's happening on your network
Can you answer "which apps are using the most bandwidth?" or "who tried to log in to the VPN last night?" If the answer is no, your firewall isn't giving you the visibility you need. Newer firewalls identify traffic by application and user, not just by port, and can send logs to a central system.
8. Your insurer or compliance framework is asking questions
Cyber insurance questionnaires now commonly ask about firewalls, MFA on remote access, patching and logging. If you're working toward CMMC or NIST 800-171, boundary protection is a core requirement. An unsupported firewall is hard to defend in either conversation. If you're a defense supplier, my post on CMMC Level 1 vs. Level 2 explains which level likely applies to you.
How to check your firewall's support status in 15 minutes
You don't need a consultant to get a first answer. Here's the quick version:
- Find the exact model and serial number. It's usually on a label on the unit and on the dashboard after you log in.
- Note the firmware version. Write down exactly what the dashboard shows.
- Search the vendor's end-of-life page. Search for the model number plus "end of life" or "EOL." Stick to the vendor's own site, not reseller pages.
- Check the latest firmware for your model. Compare it to what you're running. If you're several major versions behind, plan an update.
- Open the licensing page. Check expiration dates on support and every security subscription.
- Look up your firmware against advisories. Check the vendor's security advisory page and CISA's Known Exploited Vulnerabilities catalog for your model.
- Write it all down. Model, firmware, end-of-support date, subscription dates. Put a calendar reminder 12 months before end of support.
If you find you're past end of support, don't panic, but don't wait for the next budget cycle either. Make sure firmware is as current as it can be, close any ports you don't need, and start planning the replacement now.
What to replace it with
The good news is that firewall options for small businesses have gotten much better. Here's how I'd think about it.
Get a next-generation firewall, not just a router
A consumer or ISP-provided router isn't a business firewall. For most small businesses and manufacturers, the right fit is a next-generation firewall (NGFW) from an established vendor. Look for these features:
- Intrusion prevention (IPS)
- Application and user awareness
- Malware and web filtering
- SSL/TLS inspection, with the ability to exempt sensitive traffic like banking or healthcare sites
- Modern remote-access VPN with MFA support
- Support for multiple networks (VLANs) so you can separate guests, office and production equipment
- Logging you can send to a central tool or a managed service
Size it for security features turned on
This is where people get burned. Vendors publish several throughput numbers. The biggest one is usually raw firewall throughput with nothing else turned on. Look for the "threat protection" or "IPS + application control" number instead, since that's closer to real-world use. Then plan for growth over the next five years, not just today.
Plan for the subscriptions
The hardware is only part of the cost. Security subscriptions and support often run every year and are commonly sold in one-, three- or five-year terms. Budget for them up front so they don't lapse in year three. A firewall without its subscriptions is a lot less useful.
Think about how it'll be managed
Cloud-managed firewalls make it easier to push updates, check health and pull reports, especially if you have more than one location. Whatever you pick, decide who owns patching and monitoring. A great firewall that nobody watches ages just as badly as a cheap one. If you're weighing whether to handle this in-house or hand it to a provider, I broke down the numbers in MSP vs. hiring a full-time IT person.
Don't forget the plant floor
If you run production equipment, the new firewall is a chance to separate your shop-floor network from the office network. That way an infected laptop can't reach your CNC machines or PLCs. My guide on securing shop-floor OT networks without stopping production covers how to do that safely.
How to swap firewalls without a weekend of downtime
Replacing a firewall is very doable without drama if you plan it. Here's the process we follow:
- Export and review the old config. Don't copy rules blindly. Old firewalls are full of rules for servers and vendors that no longer exist.
- Document what depends on it. VPNs, port forwards, site-to-site tunnels, DHCP, DNS, static IPs and any partner connections.
- Build the new config ahead of time. Rebuild clean rules on the new unit, with your network separation planned in.
- Test what you can before cutover. Stage the new firewall and test remote access and key apps if possible.
- Schedule a maintenance window. For most small businesses, a few hours after a shift ends is plenty if the prep is done.
- Have a rollback plan. Keep the old firewall racked and cabled nearby so you can swap back quickly if something breaks.
- Check everything the next morning. Walk the floor, check the VPN, confirm backups ran overnight, and review the logs.
My partner Mukesh, who has spent 25 years in cybersecurity, always adds one more step: after cutover, scan your public IP addresses from the outside to make sure only the ports you meant to open are open. It takes a few minutes and catches mistakes.
Frequently asked questions
How often should a business firewall be replaced?
Many businesses replace firewalls every five to seven years, but the real deadline is the vendor's end-of-support date. Your bandwidth and security needs can also outgrow a firewall before then. Check the support date and throughput when you budget each year.
Is it safe to use a firewall after end of support?
It still passes traffic, but it no longer gets security patches for new vulnerabilities. Because firewalls face the internet and are heavily targeted, running one past end of support is a real risk. If you must, keep it as locked down as possible and replace it soon.
What's the difference between a firewall and a next-generation firewall?
A traditional firewall filters traffic mostly by IP address and port. A next-generation firewall adds features like intrusion prevention, application awareness, malware filtering and user-based rules. For most businesses today, an NGFW is the baseline.
How much does a small business firewall cost?
It varies a lot by vendor, throughput and the number of users and locations. The hardware is often the smaller part of the cost over time, since security subscriptions and support renew every year. Ask for a quote that includes at least three years of subscriptions so you can compare fairly.
Can I just use the router my internet provider gave me?
For a home office, maybe. For a business, generally no. ISP routers usually lack intrusion prevention, detailed logging, network separation and proper remote-access options, and you may not control when their firmware gets updated.
Not sure where your firewall stands?
If you went through the signs your firewall is outdated and checked off more than one, it's worth getting a second opinion before something breaks. We help manufacturers and small businesses in Roanoke and across the US figure out what they have, what's at risk and what to fix first.
The easiest way to start is our free cybersecurity assessment. We'll look at your firewall and network edge, flag anything out of support or exposed, and give you a plain-English list of next steps. No pressure to buy anything. Request your free assessment here.
Related reading
- Cybersecurity for Roanoke Small Businesses: 10 Steps to Protect Your Company
- How to Secure Shop-Floor (OT) Networks Without Stopping Production
- Managed IT Services in Roanoke, VA: What Local Businesses Should Expect
Harsha is a co-founder of SoftwarePac Technologies in Roanoke, VA, and a network engineer with 15 years of experience.




